From: Stefan Dösinger Subject: [PATCH] ddraw/tests: Rewrite SrcColorKey32BlitTest. Message-Id: <20170216201901.30134-1-stefandoesinger@gmx.at> Date: Thu, 16 Feb 2017 20:19:01 +0000 Functional differences from the old version: *) The DDBLT_KEYDEST | DDBLT_KEYSRC test is disabled. It behaves differently on different Windows versions or drivers. I doubt there is an application that relies on this case. *) Version 4 and 7 use the destination's surface destination blit key, which is much saner than the v1 / v2 behavior. I have kept the v1 / v2 behavior in wined3d though and marked the new tests todo. *) Extend the v1 and v2 tests a bit to cover the case where the source surface has no destination blit key set and DDBLT_KEYDEST is used. *) Avoid using 0 as color key and test color. Use 0x000000aa instead. *) A DDBLT_KEYDEST blit without a destination key in the destination surface is an error, regardless of the used interface version. *) Accept the Nvidia XRGB color key results with X != 0. I am open to removing this test entirely as we're accepting a lot of different outcomes now. Signed-off-by: Stefan Dösinger --- dlls/ddraw/surface.c | 6 + dlls/ddraw/tests/ddraw1.c | 459 +++++++++++++++++++++++++++++++++++++++ dlls/ddraw/tests/ddraw2.c | 466 ++++++++++++++++++++++++++++++++++++++++ dlls/ddraw/tests/ddraw4.c | 445 ++++++++++++++++++++++++++++++++++++++ dlls/ddraw/tests/ddraw7.c | 445 ++++++++++++++++++++++++++++++++++++++ dlls/ddraw/tests/dsurface.c | 510 -------------------------------------------- 6 files changed, 1821 insertions(+), 510 deletions(-) diff --git a/dlls/ddraw/surface.c b/dlls/ddraw/surface.c index 710f6cd..5695812 100644 --- a/dlls/ddraw/surface.c +++ b/dlls/ddraw/surface.c @@ -1657,6 +1657,12 @@ static HRESULT WINAPI DECLSPEC_HOTPATCH ddraw_surface7_Blt(IDirectDrawSurface7 * if (flags & DDBLT_KEYSRC && (!src_impl || !(src_impl->surface_desc.dwFlags & DDSD_CKSRCBLT))) { + WARN("DDBLT_KEYSRC blit without color key in surface, returning DDERR_INVALIDPARAMS\n"); + wined3d_mutex_unlock(); + return DDERR_INVALIDPARAMS; + } + if (flags & DDBLT_KEYDEST && !(dst_impl->surface_desc.dwFlags & DDSD_CKDESTBLT)) + { WARN("DDBLT_KEYDEST blit without color key in surface, returning DDERR_INVALIDPARAMS\n"); wined3d_mutex_unlock(); return DDERR_INVALIDPARAMS; diff --git a/dlls/ddraw/tests/ddraw1.c b/dlls/ddraw/tests/ddraw1.c index c682466..8df035d 100644 --- a/dlls/ddraw/tests/ddraw1.c +++ b/dlls/ddraw/tests/ddraw1.c @@ -10163,6 +10163,464 @@ static void test_texture_load(void) DestroyWindow(window); } +static void test_ck_operation(void) +{ + IDirectDrawSurface *src, *dst; + IDirectDrawSurface7 *src7, *dst7; + DDSURFACEDESC surface_desc; + IDirectDraw *ddraw; + ULONG refcount; + HWND window; + HRESULT hr; + DWORD *color; + unsigned int i; + DDCOLORKEY ckey; + DDBLTFX fx; + + window = CreateWindowA("static", "ddraw_test", WS_OVERLAPPEDWINDOW, + 0, 0, 640, 480, 0, 0, 0, 0); + ddraw = create_ddraw(); + ok(!!ddraw, "Failed to create a ddraw object.\n"); + hr = IDirectDraw_SetCooperativeLevel(ddraw, window, DDSCL_NORMAL); + ok(SUCCEEDED(hr), "Failed to set cooperative level, hr %#x.\n", hr); + + memset(&surface_desc, 0, sizeof(surface_desc)); + surface_desc.dwSize = sizeof(surface_desc); + surface_desc.dwFlags = DDSD_CAPS | DDSD_WIDTH | DDSD_HEIGHT | DDSD_PIXELFORMAT; + surface_desc.dwWidth = 6; + surface_desc.dwHeight = 1; + surface_desc.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN; + U4(surface_desc).ddpfPixelFormat.dwFlags = DDPF_RGB; + U1(surface_desc.ddpfPixelFormat).dwRGBBitCount = 32; + U2(surface_desc.ddpfPixelFormat).dwRBitMask = 0x00ff0000; + U3(surface_desc.ddpfPixelFormat).dwGBitMask = 0x0000ff00; + U4(surface_desc.ddpfPixelFormat).dwBBitMask = 0x000000ff; + hr = IDirectDraw_CreateSurface(ddraw, &surface_desc, &dst, NULL); + ok(SUCCEEDED(hr), "Failed to create surface, hr %#x.\n", hr); + + surface_desc.dwFlags |= DDSD_CKSRCBLT; + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0x00ff00ff; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0x00ff00ff; + hr = IDirectDraw_CreateSurface(ddraw, &surface_desc, &src, NULL); + ok(SUCCEEDED(hr), "Failed to create surface, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(src, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + ok(!(surface_desc.dwFlags & DDSD_LPSURFACE), "Surface desc has LPSURFACE Flags set.\n"); + color = surface_desc.lpSurface; + color[0] = 0x77010203; + color[1] = 0x00010203; + color[2] = 0x77ff00ff; + color[3] = 0x00ff00ff; + hr = IDirectDrawSurface_Unlock(src, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + for (i = 0; i < 2; ++i) + { + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = 0xcccccccc; + color[1] = 0xcccccccc; + color[2] = 0xcccccccc; + color[3] = 0xcccccccc; + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + if (i) + { + hr = IDirectDrawSurface_BltFast(dst, 0, 0, src, NULL, DDBLTFAST_SRCCOLORKEY); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + } + else + { + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, NULL); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + } + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT | DDLOCK_READONLY, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + ok(!(surface_desc.dwFlags & DDSD_LPSURFACE), "Surface desc has LPSURFACE Flags set.\n"); + color = surface_desc.lpSurface; + /* Different behavior on some drivers / windows versions. Some versions ignore the X channel when + * color keying, but copy it to the destination surface. Others (sysmem surfaces) apply it for + * color keying, but do not copy it into the destination surface . Nvidia neither uses it for + * color keying nor copies it. */ + ok((color[0] == 0x00010203 && color[1] == 0x00010203 + && color[2] == 0x00ff00ff && color[3] == 0xcccccccc) + || (color[0] == 0x77010203 && color[1] == 0x00010203 + && color[2] == 0xcccccccc && color[3] == 0xcccccccc) + || (color[0] == 0x00010203 && color[1] == 0x00010203 + && color[2] == 0xcccccccc && color[3] == 0xcccccccc), + "Destination data after blitting is %08x %08x %08x %08x, i=%u.\n", + color[0], color[1], color[2], color[3], i); + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + } + + hr = IDirectDrawSurface_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x00ff00ff && ckey.dwColorSpaceHighValue == 0x00ff00ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0x0000ff00; + hr = IDirectDrawSurface_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x0000ff00 && ckey.dwColorSpaceHighValue == 0x0000ff00, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface_GetSurfaceDesc(src, &surface_desc); + ok(SUCCEEDED(hr), "Failed to get surface desc, hr %#x.\n", hr); + ok(surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue == 0x0000ff00 + && surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue == 0x0000ff00, + "Got unexpected color key low=%08x high=%08x.\n", surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue, + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue); + + /* Test SetColorKey with dwColorSpaceHighValue < dwColorSpaceLowValue */ + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x00000000; + hr = IDirectDrawSurface_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000ff && ckey.dwColorSpaceHighValue == 0x000000ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x00000001; + hr = IDirectDrawSurface_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000ff && ckey.dwColorSpaceHighValue == 0x000000ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = 0x000000fe; + ckey.dwColorSpaceHighValue = 0x000000fd; + hr = IDirectDrawSurface_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000fe && ckey.dwColorSpaceHighValue == 0x000000fe, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + /* Test source and destination keys and where they are read from. */ + ckey.dwColorSpaceLowValue = 0x0000ff00; + ckey.dwColorSpaceHighValue = 0x0000ff00; + hr = IDirectDrawSurface_SetColorKey(dst, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + ckey.dwColorSpaceLowValue = 0x00ff0000; + ckey.dwColorSpaceHighValue = 0x00ff0000; + hr = IDirectDrawSurface_SetColorKey(dst, DDCKEY_DESTBLT, &ckey); + ok(SUCCEEDED(hr) || hr == DDERR_NOCOLORKEYHW, "Failed to set color key, hr %#x.\n", hr); + if (FAILED(hr)) + { + /* Nvidia reject dest keys, AMD allows them. This applies to vidmem and sysmem surfaces. */ + skip("Failed to set destination color key, skipping related tests.\n"); + goto done; + } + + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x000000ff; + hr = IDirectDrawSurface_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + ckey.dwColorSpaceLowValue = 0x000000aa; + ckey.dwColorSpaceHighValue = 0x000000aa; + hr = IDirectDrawSurface_SetColorKey(src, DDCKEY_DESTBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + memset(&fx, 0, sizeof(fx)); + fx.dwSize = sizeof(fx); + fx.ddckSrcColorkey.dwColorSpaceHighValue = 0x00110000; + fx.ddckSrcColorkey.dwColorSpaceLowValue = 0x00110000; + fx.ddckDestColorkey.dwColorSpaceHighValue = 0x00001100; + fx.ddckDestColorkey.dwColorSpaceLowValue = 0x00001100; + + hr = IDirectDrawSurface_Lock(src, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = 0x000000ff; /* Applies to src blt key in src surface. */ + color[1] = 0x000000aa; /* Applies to dst blt key in src surface. */ + color[2] = 0x00ff0000; /* Dst color key in dst surface. */ + color[3] = 0x0000ff00; /* Src color key in dst surface. */ + color[4] = 0x00001100; /* Src color key in ddbltfx. */ + color[5] = 0x00110000; /* Dst color key in ddbltfx. */ + hr = IDirectDrawSurface_Unlock(src, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Test a blit without keying. */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, 0, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Should have copied src data unmodified to dst. */ + ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src key. */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Src key applied to color[0]. It is unmodified, the others are copied. */ + ok(color[0] == 0x55555555 && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src override. */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYSRCOVERRIDE, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Override key applied to color[5]. It is unmodified, the others are copied. */ + ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x55555555, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src override AND src key. That is not supposed to work. */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC | DDBLT_KEYSRCOVERRIDE, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Ensure the desination was not changed. */ + ok(color[0] == 0x55555555 && color[1] == 0x55555555 && color[2] == 0x55555555 && + color[3] == 0x55555555 && color[4] == 0x55555555 && color[5] == 0x55555555, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + /* Use different dst colors for the dst key test. */ + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[4,5], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* What happens with a QI'd newer version of the interface? It takes the key + * from the destination surface. */ + hr = IDirectDrawSurface_QueryInterface(src, &IID_IDirectDrawSurface7, (void **)&src7); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface interface, hr %#x.\n", hr); + hr = IDirectDrawSurface_QueryInterface(dst, &IID_IDirectDrawSurface7, (void **)&dst7); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface interface, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Blt(dst7, NULL, src7, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + IDirectDrawSurface7_Release(dst7); + IDirectDrawSurface7_Release(src7); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[0,1], they are the only changed pixels. */ + todo_wine ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest override key blit. */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYDESTOVERRIDE, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[2,3], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest override together with surface key. Supposed to fail. */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST | DDBLT_KEYDESTOVERRIDE, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Destination is unchanged. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Source and destination key. This is driver dependent. New HW treats it like + * DDBLT_KEYSRC. Older HW and some software renderers apply both keys. */ + if (0) + { + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST | DDBLT_KEYSRC, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Color[0] is filtered by the src key, 2-5 are filtered by the dst key, if + * the driver applies it. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + } + + /* Override keys without ddbltfx parameter fail */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYDESTOVERRIDE, NULL); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYSRCOVERRIDE, NULL); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + /* Try blitting without keys in the source surface. */ + hr = IDirectDrawSurface_SetColorKey(src, DDCKEY_SRCBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + hr = IDirectDrawSurface_SetColorKey(src, DDCKEY_DESTBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + /* That fails now. Do not bother to check that the data is unmodified. */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + /* Surprisingly this still works. It uses the old key from the src surface. */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[4,5], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + hr = IDirectDrawSurface_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* This returns DDERR_NOCOLORKEY as expected. */ + hr = IDirectDrawSurface_GetColorKey(src, DDCKEY_DESTBLT, &ckey); + ok(hr == DDERR_NOCOLORKEY, "Got unexpected hr %#x.\n", hr); + + /* GetSurfaceDesc returns a zeroed key as expected. */ + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0x12345678; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0x12345678; + hr = IDirectDrawSurface_GetSurfaceDesc(src, &surface_desc); + ok(SUCCEEDED(hr), "Failed to get surface desc, hr %#x.\n", hr); + ok(!surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue + && !surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue, + "Got unexpected color key low=%08x high=%08x.\n", surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue, + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue); + + /* Try blitting without keys in the destination surface. */ + hr = IDirectDrawSurface_SetColorKey(dst, DDCKEY_SRCBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + hr = IDirectDrawSurface_SetColorKey(dst, DDCKEY_DESTBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + /* This is weird. It makes sense in v4 and v7, but because v1 + * uses the key from the src surface it makes no sense here. */ + hr = IDirectDrawSurface_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + +done: + IDirectDrawSurface_Release(src); + IDirectDrawSurface_Release(dst); + refcount = IDirectDraw_Release(ddraw); + ok(!refcount, "DirectDraw has %u references left.\n", refcount); + DestroyWindow(window); +} + START_TEST(ddraw1) { IDirectDraw *ddraw; @@ -10249,4 +10707,5 @@ START_TEST(ddraw1) test_display_mode_surface_pixel_format(); test_surface_desc_size(); test_texture_load(); + test_ck_operation(); } diff --git a/dlls/ddraw/tests/ddraw2.c b/dlls/ddraw/tests/ddraw2.c index d6491ea..dc8b0d1 100644 --- a/dlls/ddraw/tests/ddraw2.c +++ b/dlls/ddraw/tests/ddraw2.c @@ -11487,6 +11487,471 @@ static void test_surface_desc_size(void) ok(!refcount, "DirectDraw has %u references left.\n", refcount); } +static void test_ck_operation(void) +{ + IDirectDrawSurface2 *src, *dst; + IDirectDrawSurface7 *src7, *dst7; + IDirectDrawSurface *surface1; + DDSURFACEDESC surface_desc; + IDirectDraw2 *ddraw; + ULONG refcount; + HWND window; + HRESULT hr; + DWORD *color; + unsigned int i; + DDCOLORKEY ckey; + DDBLTFX fx; + + window = CreateWindowA("static", "ddraw_test", WS_OVERLAPPEDWINDOW, + 0, 0, 640, 480, 0, 0, 0, 0); + ddraw = create_ddraw(); + ok(!!ddraw, "Failed to create a ddraw object.\n"); + hr = IDirectDraw2_SetCooperativeLevel(ddraw, window, DDSCL_NORMAL); + ok(SUCCEEDED(hr), "Failed to set cooperative level, hr %#x.\n", hr); + + memset(&surface_desc, 0, sizeof(surface_desc)); + surface_desc.dwSize = sizeof(surface_desc); + surface_desc.dwFlags = DDSD_CAPS | DDSD_WIDTH | DDSD_HEIGHT | DDSD_PIXELFORMAT; + surface_desc.dwWidth = 6; + surface_desc.dwHeight = 1; + surface_desc.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN; + U4(surface_desc).ddpfPixelFormat.dwFlags = DDPF_RGB; + U1(surface_desc.ddpfPixelFormat).dwRGBBitCount = 32; + U2(surface_desc.ddpfPixelFormat).dwRBitMask = 0x00ff0000; + U3(surface_desc.ddpfPixelFormat).dwGBitMask = 0x0000ff00; + U4(surface_desc.ddpfPixelFormat).dwBBitMask = 0x000000ff; + hr = IDirectDraw2_CreateSurface(ddraw, &surface_desc, &surface1, NULL); + ok(SUCCEEDED(hr), "Failed to create surface, hr %#x.\n", hr); + hr = IDirectDrawSurface_QueryInterface(surface1, &IID_IDirectDrawSurface2, (void **)&dst); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface2, hr %#x.\n", hr); + IDirectDrawSurface_Release(surface1); + + surface_desc.dwFlags |= DDSD_CKSRCBLT; + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0x00ff00ff; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0x00ff00ff; + hr = IDirectDraw2_CreateSurface(ddraw, &surface_desc, &surface1, NULL); + ok(SUCCEEDED(hr), "Failed to create surface, hr %#x.\n", hr); + hr = IDirectDrawSurface_QueryInterface(surface1, &IID_IDirectDrawSurface2, (void **)&src); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface2, hr %#x.\n", hr); + IDirectDrawSurface_Release(surface1); + + hr = IDirectDrawSurface2_Lock(src, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + ok(!(surface_desc.dwFlags & DDSD_LPSURFACE), "Surface desc has LPSURFACE Flags set.\n"); + color = surface_desc.lpSurface; + color[0] = 0x77010203; + color[1] = 0x00010203; + color[2] = 0x77ff00ff; + color[3] = 0x00ff00ff; + hr = IDirectDrawSurface2_Unlock(src, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + for (i = 0; i < 2; ++i) + { + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = 0xcccccccc; + color[1] = 0xcccccccc; + color[2] = 0xcccccccc; + color[3] = 0xcccccccc; + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + if (i) + { + hr = IDirectDrawSurface2_BltFast(dst, 0, 0, src, NULL, DDBLTFAST_SRCCOLORKEY); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + } + else + { + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, NULL); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + } + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT | DDLOCK_READONLY, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + ok(!(surface_desc.dwFlags & DDSD_LPSURFACE), "Surface desc has LPSURFACE Flags set.\n"); + color = surface_desc.lpSurface; + /* Different behavior on some drivers / windows versions. Some versions ignore the X channel when + * color keying, but copy it to the destination surface. Others (sysmem surfaces) apply it for + * color keying, but do not copy it into the destination surface . Nvidia neither uses it for + * color keying nor copies it. */ + ok((color[0] == 0x00010203 && color[1] == 0x00010203 + && color[2] == 0x00ff00ff && color[3] == 0xcccccccc) + || (color[0] == 0x77010203 && color[1] == 0x00010203 + && color[2] == 0xcccccccc && color[3] == 0xcccccccc) + || (color[0] == 0x00010203 && color[1] == 0x00010203 + && color[2] == 0xcccccccc && color[3] == 0xcccccccc), + "Destination data after blitting is %08x %08x %08x %08x, i=%u.\n", + color[0], color[1], color[2], color[3], i); + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + } + + hr = IDirectDrawSurface2_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x00ff00ff && ckey.dwColorSpaceHighValue == 0x00ff00ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0x0000ff00; + hr = IDirectDrawSurface2_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface2_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x0000ff00 && ckey.dwColorSpaceHighValue == 0x0000ff00, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface2_GetSurfaceDesc(src, &surface_desc); + ok(SUCCEEDED(hr), "Failed to get surface desc, hr %#x.\n", hr); + ok(surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue == 0x0000ff00 + && surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue == 0x0000ff00, + "Got unexpected color key low=%08x high=%08x.\n", surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue, + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue); + + /* Test SetColorKey with dwColorSpaceHighValue < dwColorSpaceLowValue */ + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x00000000; + hr = IDirectDrawSurface2_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface2_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000ff && ckey.dwColorSpaceHighValue == 0x000000ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x00000001; + hr = IDirectDrawSurface2_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface2_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000ff && ckey.dwColorSpaceHighValue == 0x000000ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = 0x000000fe; + ckey.dwColorSpaceHighValue = 0x000000fd; + hr = IDirectDrawSurface2_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface2_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000fe && ckey.dwColorSpaceHighValue == 0x000000fe, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + /* Test source and destination keys and where they are read from. */ + ckey.dwColorSpaceLowValue = 0x0000ff00; + ckey.dwColorSpaceHighValue = 0x0000ff00; + hr = IDirectDrawSurface2_SetColorKey(dst, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + ckey.dwColorSpaceLowValue = 0x00ff0000; + ckey.dwColorSpaceHighValue = 0x00ff0000; + hr = IDirectDrawSurface2_SetColorKey(dst, DDCKEY_DESTBLT, &ckey); + ok(SUCCEEDED(hr) || hr == DDERR_NOCOLORKEYHW, "Failed to set color key, hr %#x.\n", hr); + if (FAILED(hr)) + { + /* Nvidia reject dest keys, AMD allows them. This applies to vidmem and sysmem surfaces. */ + skip("Failed to set destination color key, skipping related tests.\n"); + goto done; + } + + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x000000ff; + hr = IDirectDrawSurface2_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + ckey.dwColorSpaceLowValue = 0x000000aa; + ckey.dwColorSpaceHighValue = 0x000000aa; + hr = IDirectDrawSurface2_SetColorKey(src, DDCKEY_DESTBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + memset(&fx, 0, sizeof(fx)); + fx.dwSize = sizeof(fx); + fx.ddckSrcColorkey.dwColorSpaceHighValue = 0x00110000; + fx.ddckSrcColorkey.dwColorSpaceLowValue = 0x00110000; + fx.ddckDestColorkey.dwColorSpaceHighValue = 0x00001100; + fx.ddckDestColorkey.dwColorSpaceLowValue = 0x00001100; + + hr = IDirectDrawSurface2_Lock(src, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = 0x000000ff; /* Applies to src blt key in src surface. */ + color[1] = 0x000000aa; /* Applies to dst blt key in src surface. */ + color[2] = 0x00ff0000; /* Dst color key in dst surface. */ + color[3] = 0x0000ff00; /* Src color key in dst surface. */ + color[4] = 0x00001100; /* Src color key in ddbltfx. */ + color[5] = 0x00110000; /* Dst color key in ddbltfx. */ + hr = IDirectDrawSurface2_Unlock(src, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Test a blit without keying. */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, 0, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Should have copied src data unmodified to dst. */ + ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src key. */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Src key applied to color[0]. It is unmodified, the others are copied. */ + ok(color[0] == 0x55555555 && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src override. */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYSRCOVERRIDE, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Override key applied to color[5]. It is unmodified, the others are copied. */ + ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x55555555, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src override AND src key. That is not supposed to work. */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC | DDBLT_KEYSRCOVERRIDE, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Ensure the desination was not changed. */ + ok(color[0] == 0x55555555 && color[1] == 0x55555555 && color[2] == 0x55555555 && + color[3] == 0x55555555 && color[4] == 0x55555555 && color[5] == 0x55555555, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + /* Use different dst colors for the dst key test. */ + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest key blit. The key is taken from the SOURCE surface in v2! */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[4,5], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* What happens with a QI'd newer version of the interface? It takes the key + * from the destination surface. */ + hr = IDirectDrawSurface2_QueryInterface(src, &IID_IDirectDrawSurface7, (void **)&src7); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface interface, hr %#x.\n", hr); + hr = IDirectDrawSurface2_QueryInterface(dst, &IID_IDirectDrawSurface7, (void **)&dst7); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface interface, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Blt(dst7, NULL, src7, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + IDirectDrawSurface7_Release(dst7); + IDirectDrawSurface7_Release(src7); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[0,1], they are the only changed pixels. */ + todo_wine ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest override key blit. */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYDESTOVERRIDE, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[2,3], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest override together with surface key. Supposed to fail. */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST | DDBLT_KEYDESTOVERRIDE, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Destination is unchanged. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Source and destination key. This is driver dependent. New HW treats it like + * DDBLT_KEYSRC. Older HW and some software renderers apply both keys. */ + if (0) + { + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST | DDBLT_KEYSRC, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Color[0] is filtered by the src key, 2-5 are filtered by the dst key, if + * the driver applies it. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + } + + /* Override keys without ddbltfx parameter fail */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYDESTOVERRIDE, NULL); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYSRCOVERRIDE, NULL); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + /* Try blitting without keys in the source surface. */ + hr = IDirectDrawSurface2_SetColorKey(src, DDCKEY_SRCBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + hr = IDirectDrawSurface2_SetColorKey(src, DDCKEY_DESTBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + /* That fails now. Do not bother to check that the data is unmodified. */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + /* Surprisingly this still works. It uses the old key from the src surface. */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface2_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[4,5], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + hr = IDirectDrawSurface2_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* This returns DDERR_NOCOLORKEY as expected. */ + hr = IDirectDrawSurface2_GetColorKey(src, DDCKEY_DESTBLT, &ckey); + ok(hr == DDERR_NOCOLORKEY, "Got unexpected hr %#x.\n", hr); + + /* GetSurfaceDesc returns a zeroed key as expected. */ + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0x12345678; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0x12345678; + hr = IDirectDrawSurface2_GetSurfaceDesc(src, &surface_desc); + ok(SUCCEEDED(hr), "Failed to get surface desc, hr %#x.\n", hr); + ok(!surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue + && !surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue, + "Got unexpected color key low=%08x high=%08x.\n", surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue, + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue); + + /* Try blitting without keys in the destination surface. */ + hr = IDirectDrawSurface2_SetColorKey(dst, DDCKEY_SRCBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + hr = IDirectDrawSurface2_SetColorKey(dst, DDCKEY_DESTBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + /* This fails, as sanity would dictate. */ + hr = IDirectDrawSurface2_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + +done: + IDirectDrawSurface2_Release(src); + IDirectDrawSurface2_Release(dst); + refcount = IDirectDraw2_Release(ddraw); + ok(!refcount, "DirectDraw has %u references left.\n", refcount); + DestroyWindow(window); +} + START_TEST(ddraw2) { IDirectDraw2 *ddraw; @@ -11581,4 +12046,5 @@ START_TEST(ddraw2) test_transform_vertices(); test_display_mode_surface_pixel_format(); test_surface_desc_size(); + test_ck_operation(); } diff --git a/dlls/ddraw/tests/ddraw4.c b/dlls/ddraw/tests/ddraw4.c index bda2ebf..30657fb 100644 --- a/dlls/ddraw/tests/ddraw4.c +++ b/dlls/ddraw/tests/ddraw4.c @@ -12885,6 +12885,450 @@ static void test_get_surface_from_dc(void) DestroyWindow(window); } +static void test_ck_operation(void) +{ + IDirectDrawSurface4 *src, *dst; + IDirectDrawSurface *src1, *dst1; + DDSURFACEDESC2 surface_desc; + IDirectDraw4 *ddraw; + ULONG refcount; + HWND window; + HRESULT hr; + DWORD *color; + unsigned int i; + DDCOLORKEY ckey; + DDBLTFX fx; + + window = CreateWindowA("static", "ddraw_test", WS_OVERLAPPEDWINDOW, + 0, 0, 640, 480, 0, 0, 0, 0); + ddraw = create_ddraw(); + ok(!!ddraw, "Failed to create a ddraw object.\n"); + hr = IDirectDraw4_SetCooperativeLevel(ddraw, window, DDSCL_NORMAL); + ok(SUCCEEDED(hr), "Failed to set cooperative level, hr %#x.\n", hr); + + memset(&surface_desc, 0, sizeof(surface_desc)); + surface_desc.dwSize = sizeof(surface_desc); + surface_desc.dwFlags = DDSD_CAPS | DDSD_WIDTH | DDSD_HEIGHT | DDSD_PIXELFORMAT; + surface_desc.dwWidth = 6; + surface_desc.dwHeight = 1; + surface_desc.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN; + U4(surface_desc).ddpfPixelFormat.dwFlags = DDPF_RGB; + U1(U4(surface_desc.ddpfPixelFormat)).dwRGBBitCount = 32; + U2(U4(surface_desc.ddpfPixelFormat)).dwRBitMask = 0x00ff0000; + U3(U4(surface_desc.ddpfPixelFormat)).dwGBitMask = 0x0000ff00; + U4(U4(surface_desc.ddpfPixelFormat)).dwBBitMask = 0x000000ff; + hr = IDirectDraw4_CreateSurface(ddraw, &surface_desc, &dst, NULL); + ok(SUCCEEDED(hr), "Failed to create surface, hr %#x.\n", hr); + + surface_desc.dwFlags |= DDSD_CKSRCBLT; + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0x00ff00ff; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0x00ff00ff; + hr = IDirectDraw4_CreateSurface(ddraw, &surface_desc, &src, NULL); + ok(SUCCEEDED(hr), "Failed to create surface, hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(src, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + ok(!(surface_desc.dwFlags & DDSD_LPSURFACE), "Surface desc has LPSURFACE Flags set.\n"); + color = surface_desc.lpSurface; + color[0] = 0x77010203; + color[1] = 0x00010203; + color[2] = 0x77ff00ff; + color[3] = 0x00ff00ff; + hr = IDirectDrawSurface4_Unlock(src, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + for (i = 0; i < 2; ++i) + { + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = 0xcccccccc; + color[1] = 0xcccccccc; + color[2] = 0xcccccccc; + color[3] = 0xcccccccc; + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + if (i) + { + hr = IDirectDrawSurface4_BltFast(dst, 0, 0, src, NULL, DDBLTFAST_SRCCOLORKEY); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + } + else + { + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, NULL); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + } + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT | DDLOCK_READONLY, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + ok(!(surface_desc.dwFlags & DDSD_LPSURFACE), "Surface desc has LPSURFACE Flags set.\n"); + color = surface_desc.lpSurface; + /* Different behavior on some drivers / windows versions. Some versions ignore the X channel when + * color keying, but copy it to the destination surface. Others (sysmem surfaces) apply it for + * color keying, but do not copy it into the destination surface . Nvidia neither uses it for + * color keying nor copies it. */ + ok((color[0] == 0x00010203 && color[1] == 0x00010203 + && color[2] == 0x00ff00ff && color[3] == 0xcccccccc) + || (color[0] == 0x77010203 && color[1] == 0x00010203 + && color[2] == 0xcccccccc && color[3] == 0xcccccccc) + || (color[0] == 0x00010203 && color[1] == 0x00010203 + && color[2] == 0xcccccccc && color[3] == 0xcccccccc), + "Destination data after blitting is %08x %08x %08x %08x, i=%u.\n", + color[0], color[1], color[2], color[3], i); + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + } + + hr = IDirectDrawSurface4_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x00ff00ff && ckey.dwColorSpaceHighValue == 0x00ff00ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0x0000ff00; + hr = IDirectDrawSurface4_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface4_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x0000ff00 && ckey.dwColorSpaceHighValue == 0x0000ff00, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface4_GetSurfaceDesc(src, &surface_desc); + ok(SUCCEEDED(hr), "Failed to get surface desc, hr %#x.\n", hr); + ok(surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue == 0x0000ff00 + && surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue == 0x0000ff00, + "Got unexpected color key low=%08x high=%08x.\n", surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue, + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue); + + /* Test SetColorKey with dwColorSpaceHighValue < dwColorSpaceLowValue */ + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x00000000; + hr = IDirectDrawSurface4_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface4_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000ff && ckey.dwColorSpaceHighValue == 0x000000ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x00000001; + hr = IDirectDrawSurface4_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface4_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000ff && ckey.dwColorSpaceHighValue == 0x000000ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = 0x000000fe; + ckey.dwColorSpaceHighValue = 0x000000fd; + hr = IDirectDrawSurface4_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface4_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000fe && ckey.dwColorSpaceHighValue == 0x000000fe, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + /* Test source and destination keys and where they are read from. */ + ckey.dwColorSpaceLowValue = 0x0000ff00; + ckey.dwColorSpaceHighValue = 0x0000ff00; + hr = IDirectDrawSurface4_SetColorKey(dst, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + ckey.dwColorSpaceLowValue = 0x00ff0000; + ckey.dwColorSpaceHighValue = 0x00ff0000; + hr = IDirectDrawSurface4_SetColorKey(dst, DDCKEY_DESTBLT, &ckey); + ok(SUCCEEDED(hr) || hr == DDERR_NOCOLORKEYHW, "Failed to set color key, hr %#x.\n", hr); + if (FAILED(hr)) + { + /* Nvidia reject dest keys, AMD allows them. This applies to vidmem and sysmem surfaces. */ + skip("Failed to set destination color key, skipping related tests.\n"); + goto done; + } + + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x000000ff; + hr = IDirectDrawSurface4_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + ckey.dwColorSpaceLowValue = 0x000000aa; + ckey.dwColorSpaceHighValue = 0x000000aa; + hr = IDirectDrawSurface4_SetColorKey(src, DDCKEY_DESTBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + memset(&fx, 0, sizeof(fx)); + fx.dwSize = sizeof(fx); + fx.ddckSrcColorkey.dwColorSpaceHighValue = 0x00110000; + fx.ddckSrcColorkey.dwColorSpaceLowValue = 0x00110000; + fx.ddckDestColorkey.dwColorSpaceHighValue = 0x00001100; + fx.ddckDestColorkey.dwColorSpaceLowValue = 0x00001100; + + hr = IDirectDrawSurface4_Lock(src, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = 0x000000ff; /* Applies to src blt key in src surface. */ + color[1] = 0x000000aa; /* Applies to dst blt key in src surface. */ + color[2] = 0x00ff0000; /* Dst color key in dst surface. */ + color[3] = 0x0000ff00; /* Src color key in dst surface. */ + color[4] = 0x00001100; /* Src color key in ddbltfx. */ + color[5] = 0x00110000; /* Dst color key in ddbltfx. */ + hr = IDirectDrawSurface4_Unlock(src, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Test a blit without keying. */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, 0, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Should have copied src data unmodified to dst. */ + ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src key. */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Src key applied to color[0]. It is unmodified, the others are copied. */ + ok(color[0] == 0x55555555 && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src override. */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYSRCOVERRIDE, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Override key applied to color[5]. It is unmodified, the others are copied. */ + ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x55555555, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src override AND src key. That is not supposed to work. */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC | DDBLT_KEYSRCOVERRIDE, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Ensure the desination was not changed. */ + ok(color[0] == 0x55555555 && color[1] == 0x55555555 && color[2] == 0x55555555 && + color[3] == 0x55555555 && color[4] == 0x55555555 && color[5] == 0x55555555, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + /* Use different dst colors for the dst key test. */ + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest key blit. The key is taken from the DESTINATION surface in v4! */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[0,1], they are the only changed pixels. */ + todo_wine ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* What happens with a QI'd older version of the interface? It takes the key + * from the source surface. */ + hr = IDirectDrawSurface4_QueryInterface(src, &IID_IDirectDrawSurface, (void **)&src1); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface interface, hr %#x.\n", hr); + hr = IDirectDrawSurface4_QueryInterface(dst, &IID_IDirectDrawSurface, (void **)&dst1); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface interface, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Blt(dst1, NULL, src1, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + IDirectDrawSurface_Release(dst1); + IDirectDrawSurface_Release(src1); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[4,5], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest override key blit. */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYDESTOVERRIDE, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[2,3], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest override together with surface key. Supposed to fail. */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST | DDBLT_KEYDESTOVERRIDE, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Destination is unchanged. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Source and destination key. This is driver dependent. New HW treats it like + * DDBLT_KEYSRC. Older HW and some software renderers apply both keys. */ + if (0) + { + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST | DDBLT_KEYSRC, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Color[0] is filtered by the src key, 2-5 are filtered by the dst key, if + * the driver applies it. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + } + + /* Override keys without ddbltfx parameter fail */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYDESTOVERRIDE, NULL); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYSRCOVERRIDE, NULL); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + /* Try blitting without keys in the source surface. */ + hr = IDirectDrawSurface4_SetColorKey(src, DDCKEY_SRCBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + hr = IDirectDrawSurface4_SetColorKey(src, DDCKEY_DESTBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + /* That fails now. Do not bother to check that the data is unmodified. */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + /* Dest key blit still works, the destination surface key is used in v4. */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface4_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[0,1], they are the only changed pixels. */ + todo_wine ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + hr = IDirectDrawSurface4_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Try blitting without keys in the destination surface. */ + hr = IDirectDrawSurface4_SetColorKey(dst, DDCKEY_SRCBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + hr = IDirectDrawSurface4_SetColorKey(dst, DDCKEY_DESTBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + /* This fails, as sanity would dictate. */ + hr = IDirectDrawSurface4_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + +done: + IDirectDrawSurface4_Release(src); + IDirectDrawSurface4_Release(dst); + refcount = IDirectDraw4_Release(ddraw); + ok(!refcount, "DirectDraw has %u references left.\n", refcount); + DestroyWindow(window); +} + START_TEST(ddraw4) { IDirectDraw4 *ddraw; @@ -12988,4 +13432,5 @@ START_TEST(ddraw4) test_display_mode_surface_pixel_format(); test_surface_desc_size(); test_get_surface_from_dc(); + test_ck_operation(); } diff --git a/dlls/ddraw/tests/ddraw7.c b/dlls/ddraw/tests/ddraw7.c index 31e7640..6a30462 100644 --- a/dlls/ddraw/tests/ddraw7.c +++ b/dlls/ddraw/tests/ddraw7.c @@ -12558,6 +12558,450 @@ static void test_get_surface_from_dc(void) DestroyWindow(window); } +static void test_ck_operation(void) +{ + IDirectDrawSurface7 *src, *dst; + IDirectDrawSurface *src1, *dst1; + DDSURFACEDESC2 surface_desc; + IDirectDraw7 *ddraw; + ULONG refcount; + HWND window; + HRESULT hr; + DWORD *color; + unsigned int i; + DDCOLORKEY ckey; + DDBLTFX fx; + + window = CreateWindowA("static", "ddraw_test", WS_OVERLAPPEDWINDOW, + 0, 0, 640, 480, 0, 0, 0, 0); + ddraw = create_ddraw(); + ok(!!ddraw, "Failed to create a ddraw object.\n"); + hr = IDirectDraw7_SetCooperativeLevel(ddraw, window, DDSCL_NORMAL); + ok(SUCCEEDED(hr), "Failed to set cooperative level, hr %#x.\n", hr); + + memset(&surface_desc, 0, sizeof(surface_desc)); + surface_desc.dwSize = sizeof(surface_desc); + surface_desc.dwFlags = DDSD_CAPS | DDSD_WIDTH | DDSD_HEIGHT | DDSD_PIXELFORMAT; + surface_desc.dwWidth = 6; + surface_desc.dwHeight = 1; + surface_desc.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN; + U4(surface_desc).ddpfPixelFormat.dwFlags = DDPF_RGB; + U1(U4(surface_desc.ddpfPixelFormat)).dwRGBBitCount = 32; + U2(U4(surface_desc.ddpfPixelFormat)).dwRBitMask = 0x00ff0000; + U3(U4(surface_desc.ddpfPixelFormat)).dwGBitMask = 0x0000ff00; + U4(U4(surface_desc.ddpfPixelFormat)).dwBBitMask = 0x000000ff; + hr = IDirectDraw7_CreateSurface(ddraw, &surface_desc, &dst, NULL); + ok(SUCCEEDED(hr), "Failed to create surface, hr %#x.\n", hr); + + surface_desc.dwFlags |= DDSD_CKSRCBLT; + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0x00ff00ff; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0x00ff00ff; + hr = IDirectDraw7_CreateSurface(ddraw, &surface_desc, &src, NULL); + ok(SUCCEEDED(hr), "Failed to create surface, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(src, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + ok(!(surface_desc.dwFlags & DDSD_LPSURFACE), "Surface desc has LPSURFACE Flags set.\n"); + color = surface_desc.lpSurface; + color[0] = 0x77010203; + color[1] = 0x00010203; + color[2] = 0x77ff00ff; + color[3] = 0x00ff00ff; + hr = IDirectDrawSurface7_Unlock(src, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + for (i = 0; i < 2; ++i) + { + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = 0xcccccccc; + color[1] = 0xcccccccc; + color[2] = 0xcccccccc; + color[3] = 0xcccccccc; + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + if (i) + { + hr = IDirectDrawSurface7_BltFast(dst, 0, 0, src, NULL, DDBLTFAST_SRCCOLORKEY); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + } + else + { + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, NULL); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + } + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT | DDLOCK_READONLY, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + ok(!(surface_desc.dwFlags & DDSD_LPSURFACE), "Surface desc has LPSURFACE Flags set.\n"); + color = surface_desc.lpSurface; + /* Different behavior on some drivers / windows versions. Some versions ignore the X channel when + * color keying, but copy it to the destination surface. Others (sysmem surfaces) apply it for + * color keying, but do not copy it into the destination surface . Nvidia neither uses it for + * color keying nor copies it. */ + ok((color[0] == 0x00010203 && color[1] == 0x00010203 + && color[2] == 0x00ff00ff && color[3] == 0xcccccccc) + || (color[0] == 0x77010203 && color[1] == 0x00010203 + && color[2] == 0xcccccccc && color[3] == 0xcccccccc) + || (color[0] == 0x00010203 && color[1] == 0x00010203 + && color[2] == 0xcccccccc && color[3] == 0xcccccccc), + "Destination data after blitting is %08x %08x %08x %08x, i=%u.\n", + color[0], color[1], color[2], color[3], i); + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + } + + hr = IDirectDrawSurface7_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x00ff00ff && ckey.dwColorSpaceHighValue == 0x00ff00ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0x0000ff00; + hr = IDirectDrawSurface7_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface7_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x0000ff00 && ckey.dwColorSpaceHighValue == 0x0000ff00, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue = 0; + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface7_GetSurfaceDesc(src, &surface_desc); + ok(SUCCEEDED(hr), "Failed to get surface desc, hr %#x.\n", hr); + ok(surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue == 0x0000ff00 + && surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue == 0x0000ff00, + "Got unexpected color key low=%08x high=%08x.\n", surface_desc.ddckCKSrcBlt.dwColorSpaceLowValue, + surface_desc.ddckCKSrcBlt.dwColorSpaceHighValue); + + /* Test SetColorKey with dwColorSpaceHighValue < dwColorSpaceLowValue */ + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x00000000; + hr = IDirectDrawSurface7_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface7_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000ff && ckey.dwColorSpaceHighValue == 0x000000ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x00000001; + hr = IDirectDrawSurface7_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface7_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000ff && ckey.dwColorSpaceHighValue == 0x000000ff, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + ckey.dwColorSpaceLowValue = 0x000000fe; + ckey.dwColorSpaceHighValue = 0x000000fd; + hr = IDirectDrawSurface7_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + ckey.dwColorSpaceLowValue = ckey.dwColorSpaceHighValue = 0; + hr = IDirectDrawSurface7_GetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to get color key, hr %#x.\n", hr); + ok(ckey.dwColorSpaceLowValue == 0x000000fe && ckey.dwColorSpaceHighValue == 0x000000fe, + "Got unexpected color key low=%08x high=%08x.\n", ckey.dwColorSpaceLowValue, ckey.dwColorSpaceHighValue); + + /* Test source and destination keys and where they are read from. */ + ckey.dwColorSpaceLowValue = 0x0000ff00; + ckey.dwColorSpaceHighValue = 0x0000ff00; + hr = IDirectDrawSurface7_SetColorKey(dst, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + ckey.dwColorSpaceLowValue = 0x00ff0000; + ckey.dwColorSpaceHighValue = 0x00ff0000; + hr = IDirectDrawSurface7_SetColorKey(dst, DDCKEY_DESTBLT, &ckey); + ok(SUCCEEDED(hr) || hr == DDERR_NOCOLORKEYHW, "Failed to set color key, hr %#x.\n", hr); + if (FAILED(hr)) + { + /* Nvidia reject dest keys, AMD allows them. This applies to vidmem and sysmem surfaces. */ + skip("Failed to set destination color key, skipping related tests.\n"); + goto done; + } + + ckey.dwColorSpaceLowValue = 0x000000ff; + ckey.dwColorSpaceHighValue = 0x000000ff; + hr = IDirectDrawSurface7_SetColorKey(src, DDCKEY_SRCBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + ckey.dwColorSpaceLowValue = 0x000000aa; + ckey.dwColorSpaceHighValue = 0x000000aa; + hr = IDirectDrawSurface7_SetColorKey(src, DDCKEY_DESTBLT, &ckey); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + memset(&fx, 0, sizeof(fx)); + fx.dwSize = sizeof(fx); + fx.ddckSrcColorkey.dwColorSpaceHighValue = 0x00110000; + fx.ddckSrcColorkey.dwColorSpaceLowValue = 0x00110000; + fx.ddckDestColorkey.dwColorSpaceHighValue = 0x00001100; + fx.ddckDestColorkey.dwColorSpaceLowValue = 0x00001100; + + hr = IDirectDrawSurface7_Lock(src, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = 0x000000ff; /* Applies to src blt key in src surface. */ + color[1] = 0x000000aa; /* Applies to dst blt key in src surface. */ + color[2] = 0x00ff0000; /* Dst color key in dst surface. */ + color[3] = 0x0000ff00; /* Src color key in dst surface. */ + color[4] = 0x00001100; /* Src color key in ddbltfx. */ + color[5] = 0x00110000; /* Dst color key in ddbltfx. */ + hr = IDirectDrawSurface7_Unlock(src, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Test a blit without keying. */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, 0, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Should have copied src data unmodified to dst. */ + ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src key. */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Src key applied to color[0]. It is unmodified, the others are copied. */ + ok(color[0] == 0x55555555 && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src override. */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYSRCOVERRIDE, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Override key applied to color[5]. It is unmodified, the others are copied. */ + ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x55555555, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = color[1] = color[2] = color[3] = color[4] = color[5] = 0x55555555; + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Src override AND src key. That is not supposed to work. */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC | DDBLT_KEYSRCOVERRIDE, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Ensure the desination was not changed. */ + ok(color[0] == 0x55555555 && color[1] == 0x55555555 && color[2] == 0x55555555 && + color[3] == 0x55555555 && color[4] == 0x55555555 && color[5] == 0x55555555, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + /* Use different dst colors for the dst key test. */ + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest key blit. The key is taken from the DESTINATION surface in v7! */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[0,1], they are the only changed pixels. */ + todo_wine ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* What happens with a QI'd older version of the interface? It takes the key + * from the source surface. */ + hr = IDirectDrawSurface7_QueryInterface(src, &IID_IDirectDrawSurface, (void **)&src1); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface interface, hr %#x.\n", hr); + hr = IDirectDrawSurface7_QueryInterface(dst, &IID_IDirectDrawSurface, (void **)&dst1); + ok(SUCCEEDED(hr), "Failed to query IDirectDrawSurface interface, hr %#x.\n", hr); + + hr = IDirectDrawSurface_Blt(dst1, NULL, src1, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + IDirectDrawSurface_Release(dst1); + IDirectDrawSurface_Release(src1); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[4,5], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest override key blit. */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYDESTOVERRIDE, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[2,3], they are the only changed pixels. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Dest override together with surface key. Supposed to fail. */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST | DDBLT_KEYDESTOVERRIDE, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Destination is unchanged. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x00ff0000 && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Source and destination key. This is driver dependent. New HW treats it like + * DDBLT_KEYSRC. Older HW and some software renderers apply both keys. */ + if (0) + { + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST | DDBLT_KEYSRC, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Color[0] is filtered by the src key, 2-5 are filtered by the dst key, if + * the driver applies it. */ + ok(color[0] == 0x00ff0000 && color[1] == 0x000000aa && color[2] == 0x00ff0000 && + color[3] == 0x0000ff00 && color[4] == 0x00001100 && color[5] == 0x00110000, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + + color[0] = 0x00ff0000; /* Dest key in dst surface. */ + color[1] = 0x00ff0000; /* Dest key in dst surface. */ + color[2] = 0x00001100; /* Dest key in override. */ + color[3] = 0x00001100; /* Dest key in override. */ + color[4] = 0x000000aa; /* Dest key in src surface. */ + color[5] = 0x000000aa; /* Dest key in src surface. */ + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + } + + /* Override keys without ddbltfx parameter fail */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYDESTOVERRIDE, NULL); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYSRCOVERRIDE, NULL); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + /* Try blitting without keys in the source surface. */ + hr = IDirectDrawSurface7_SetColorKey(src, DDCKEY_SRCBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + hr = IDirectDrawSurface7_SetColorKey(src, DDCKEY_DESTBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + /* That fails now. Do not bother to check that the data is unmodified. */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYSRC, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + + /* Dest key blit still works, the destination surface key is used in v7. */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(SUCCEEDED(hr), "Failed to blit, hr %#x.\n", hr); + + hr = IDirectDrawSurface7_Lock(dst, NULL, &surface_desc, DDLOCK_WAIT, NULL); + ok(SUCCEEDED(hr), "Failed to lock surface, hr %#x.\n", hr); + color = surface_desc.lpSurface; + /* Dst key applied to color[0,1], they are the only changed pixels. */ + todo_wine ok(color[0] == 0x000000ff && color[1] == 0x000000aa && color[2] == 0x00001100 && + color[3] == 0x00001100 && color[4] == 0x000000aa && color[5] == 0x000000aa, + "Got unexpected content %08x %08x %08x %08x %08x %08x.\n", + color[0], color[1], color[2], color[3], color[4], color[5]); + hr = IDirectDrawSurface7_Unlock(dst, NULL); + ok(SUCCEEDED(hr), "Failed to unlock surface, hr %#x.\n", hr); + + /* Try blitting without keys in the destination surface. */ + hr = IDirectDrawSurface7_SetColorKey(dst, DDCKEY_SRCBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + hr = IDirectDrawSurface7_SetColorKey(dst, DDCKEY_DESTBLT, NULL); + ok(SUCCEEDED(hr), "Failed to set color key, hr %#x.\n", hr); + + /* This fails, as sanity would dictate. */ + hr = IDirectDrawSurface7_Blt(dst, NULL, src, NULL, DDBLT_KEYDEST, &fx); + ok(hr == DDERR_INVALIDPARAMS, "Got unexpected hr %#x.\n", hr); + +done: + IDirectDrawSurface7_Release(src); + IDirectDrawSurface7_Release(dst); + refcount = IDirectDraw7_Release(ddraw); + ok(!refcount, "DirectDraw has %u references left.\n", refcount); + DestroyWindow(window); +} + START_TEST(ddraw7) { HMODULE module = GetModuleHandleA("ddraw.dll"); @@ -12671,4 +13115,5 @@ START_TEST(ddraw7) test_display_mode_surface_pixel_format(); test_surface_desc_size(); test_get_surface_from_dc(); + test_ck_operation(); } diff --git a/dlls/ddraw/tests/dsurface.c b/dlls/ddraw/tests/dsurface.c index 6ecf7fe..9e02295 100644 --- a/dlls/ddraw/tests/dsurface.c +++ b/dlls/ddraw/tests/dsurface.c @@ -61,515 +61,6 @@ static void ReleaseDirectDraw(void) } } -static void SrcColorKey32BlitTest(void) -{ - IDirectDrawSurface *lpSrc; - IDirectDrawSurface *lpDst; - DDSURFACEDESC ddsd, ddsd2; - DDCOLORKEY DDColorKey; - LPDWORD lpData; - HRESULT rc; - DDBLTFX fx; - - ddsd2.dwSize = sizeof(ddsd2); - ddsd2.ddpfPixelFormat.dwSize = sizeof(ddsd2.ddpfPixelFormat); - - ddsd.dwSize = sizeof(ddsd); - ddsd.ddpfPixelFormat.dwSize = sizeof(ddsd.ddpfPixelFormat); - ddsd.dwFlags = DDSD_CAPS | DDSD_WIDTH | DDSD_HEIGHT | DDSD_PIXELFORMAT; - ddsd.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN; - ddsd.dwWidth = 800; - ddsd.dwHeight = 600; - ddsd.ddpfPixelFormat.dwFlags = DDPF_RGB; - U1(ddsd.ddpfPixelFormat).dwRGBBitCount = 32; - U2(ddsd.ddpfPixelFormat).dwRBitMask = 0xFF0000; - U3(ddsd.ddpfPixelFormat).dwGBitMask = 0x00FF00; - U4(ddsd.ddpfPixelFormat).dwBBitMask = 0x0000FF; - rc = IDirectDraw_CreateSurface(lpDD, &ddsd, &lpDst, NULL); - ok(rc==DD_OK,"CreateSurface returned: %x\n",rc); - if (FAILED(rc)) - { - skip("failed to create surface\n"); - return; - } - - ddsd.dwFlags |= DDSD_CKSRCBLT; - ddsd.ddckCKSrcBlt.dwColorSpaceLowValue = 0xFF00FF; - ddsd.ddckCKSrcBlt.dwColorSpaceHighValue = 0xFF00FF; - rc = IDirectDraw_CreateSurface(lpDD, &ddsd, &lpSrc, NULL); - ok(rc==DD_OK,"CreateSurface returned: %x\n",rc); - if (FAILED(rc)) - { - skip("failed to create surface\n"); - return; - } - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - lpData = ddsd2.lpSurface; - lpData[0] = 0xCCCCCCCC; - lpData[1] = 0xCCCCCCCC; - lpData[2] = 0xCCCCCCCC; - lpData[3] = 0xCCCCCCCC; - - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - rc = IDirectDrawSurface_Lock(lpSrc, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - lpData[0] = 0x77010203; - lpData[1] = 0x00010203; - lpData[2] = 0x77FF00FF; - lpData[3] = 0x00FF00FF; - rc = IDirectDrawSurface_Unlock(lpSrc, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYSRC, NULL); - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - /* Different behavior on some drivers / windows versions. Some versions ignore the X channel when - * color keying, but copy it to the destination surface. Others apply it for color keying, but - * do not copy it into the destination surface. - */ - if(lpData[0]==0x00010203) { - trace("X channel was not copied into the destination surface\n"); - ok((lpData[0]==0x00010203)&&(lpData[1]==0x00010203)&&(lpData[2]==0x00FF00FF)&&(lpData[3]==0xCCCCCCCC), - "Destination data after blitting is not correct\n"); - } else { - ok((lpData[0]==0x77010203)&&(lpData[1]==0x00010203)&&(lpData[2]==0xCCCCCCCC)&&(lpData[3]==0xCCCCCCCC), - "Destination data after blitting is not correct\n"); - } - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Below we repeat the same test as above but now using BltFast instead of Blt. Before - * we can carry out the test we need to restore the color of the destination surface. - */ - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - lpData = ddsd2.lpSurface; - lpData[0] = 0xCCCCCCCC; - lpData[1] = 0xCCCCCCCC; - lpData[2] = 0xCCCCCCCC; - lpData[3] = 0xCCCCCCCC; - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - IDirectDrawSurface_BltFast(lpDst, 0, 0, lpSrc, NULL, DDBLTFAST_SRCCOLORKEY); - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - /* Different behavior on some drivers / windows versions. Some versions ignore the X channel when - * color keying, but copy it to the destination surface. Others apply it for color keying, but - * do not copy it into the destination surface. - */ - if(lpData[0]==0x00010203) { - trace("X channel was not copied into the destination surface\n"); - ok((lpData[0]==0x00010203)&&(lpData[1]==0x00010203)&&(lpData[2]==0x00FF00FF)&&(lpData[3]==0xCCCCCCCC), - "Destination data after blitting is not correct\n"); - } else { - ok((lpData[0]==0x77010203)&&(lpData[1]==0x00010203)&&(lpData[2]==0xCCCCCCCC)&&(lpData[3]==0xCCCCCCCC), - "Destination data after blitting is not correct\n"); - } - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Also test SetColorKey */ - IDirectDrawSurface_GetColorKey(lpSrc, DDCKEY_SRCBLT, &DDColorKey); - ok(DDColorKey.dwColorSpaceLowValue == 0xFF00FF && DDColorKey.dwColorSpaceHighValue == 0xFF00FF, - "GetColorKey does not return the colorkey used at surface creation\n"); - - DDColorKey.dwColorSpaceLowValue = 0x00FF00; - DDColorKey.dwColorSpaceHighValue = 0x00FF00; - IDirectDrawSurface_SetColorKey(lpSrc, DDCKEY_SRCBLT, &DDColorKey); - - DDColorKey.dwColorSpaceLowValue = 0; - DDColorKey.dwColorSpaceHighValue = 0; - IDirectDrawSurface_GetColorKey(lpSrc, DDCKEY_SRCBLT, &DDColorKey); - ok(DDColorKey.dwColorSpaceLowValue == 0x00FF00 && DDColorKey.dwColorSpaceHighValue == 0x00FF00, - "GetColorKey does not return the colorkey set with SetColorKey\n"); - - ddsd.ddckCKSrcBlt.dwColorSpaceLowValue = 0; - ddsd.ddckCKSrcBlt.dwColorSpaceHighValue = 0; - IDirectDrawSurface_GetSurfaceDesc(lpSrc, &ddsd); - ok(ddsd.ddckCKSrcBlt.dwColorSpaceLowValue == 0x00FF00 && ddsd.ddckCKSrcBlt.dwColorSpaceHighValue == 0x00FF00, - "GetSurfaceDesc does not return the colorkey set with SetColorKey\n"); - - /* Test SetColorKey with dwColorSpaceHighValue < dwColorSpaceLowValue */ - DDColorKey.dwColorSpaceLowValue = 0x0000FF; - DDColorKey.dwColorSpaceHighValue = 0x000000; - IDirectDrawSurface_SetColorKey(lpSrc, DDCKEY_SRCBLT, &DDColorKey); - - DDColorKey.dwColorSpaceLowValue = 0; - DDColorKey.dwColorSpaceHighValue = 0; - IDirectDrawSurface_GetColorKey(lpSrc, DDCKEY_SRCBLT, &DDColorKey); - ok(DDColorKey.dwColorSpaceLowValue == 0x0000FF && DDColorKey.dwColorSpaceHighValue == 0x0000FF, - "GetColorKey does not return the colorkey set with SetColorKey (%x %x)\n", DDColorKey.dwColorSpaceLowValue, DDColorKey.dwColorSpaceHighValue); - - DDColorKey.dwColorSpaceLowValue = 0x0000FF; - DDColorKey.dwColorSpaceHighValue = 0x000001; - IDirectDrawSurface_SetColorKey(lpSrc, DDCKEY_SRCBLT, &DDColorKey); - - DDColorKey.dwColorSpaceLowValue = 0; - DDColorKey.dwColorSpaceHighValue = 0; - IDirectDrawSurface_GetColorKey(lpSrc, DDCKEY_SRCBLT, &DDColorKey); - ok(DDColorKey.dwColorSpaceLowValue == 0x0000FF && DDColorKey.dwColorSpaceHighValue == 0x0000FF, - "GetColorKey does not return the colorkey set with SetColorKey (%x %x)\n", DDColorKey.dwColorSpaceLowValue, DDColorKey.dwColorSpaceHighValue); - - DDColorKey.dwColorSpaceLowValue = 0x0000FF; - DDColorKey.dwColorSpaceHighValue = 0x0000FE; - IDirectDrawSurface_SetColorKey(lpSrc, DDCKEY_SRCBLT, &DDColorKey); - - DDColorKey.dwColorSpaceLowValue = 0; - DDColorKey.dwColorSpaceHighValue = 0; - IDirectDrawSurface_GetColorKey(lpSrc, DDCKEY_SRCBLT, &DDColorKey); - ok(DDColorKey.dwColorSpaceLowValue == 0x0000FF && DDColorKey.dwColorSpaceHighValue == 0x0000FF, - "GetColorKey does not return the colorkey set with SetColorKey (%x %x)\n", DDColorKey.dwColorSpaceLowValue, DDColorKey.dwColorSpaceHighValue); - - IDirectDrawSurface_Release(lpSrc); - IDirectDrawSurface_Release(lpDst); - - /* start with a new set of surfaces to test the color keying parameters to blit */ - memset(&ddsd, 0, sizeof(ddsd)); - ddsd.dwSize = sizeof(ddsd); - ddsd.ddpfPixelFormat.dwSize = sizeof(ddsd.ddpfPixelFormat); - ddsd.dwFlags = DDSD_CAPS | DDSD_WIDTH | DDSD_HEIGHT | DDSD_PIXELFORMAT | DDSD_CKSRCBLT | DDSD_CKDESTBLT; - ddsd.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN; - ddsd.dwWidth = 800; - ddsd.dwHeight = 600; - ddsd.ddpfPixelFormat.dwFlags = DDPF_RGB; - U1(ddsd.ddpfPixelFormat).dwRGBBitCount = 32; - U2(ddsd.ddpfPixelFormat).dwRBitMask = 0xFF0000; - U3(ddsd.ddpfPixelFormat).dwGBitMask = 0x00FF00; - U4(ddsd.ddpfPixelFormat).dwBBitMask = 0x0000FF; - ddsd.ddckCKDestBlt.dwColorSpaceLowValue = 0xFF0000; - ddsd.ddckCKDestBlt.dwColorSpaceHighValue = 0xFF0000; - ddsd.ddckCKSrcBlt.dwColorSpaceLowValue = 0x00FF00; - ddsd.ddckCKSrcBlt.dwColorSpaceHighValue = 0x00FF00; - rc = IDirectDraw_CreateSurface(lpDD, &ddsd, &lpDst, NULL); - ok(rc==DD_OK || rc == DDERR_NOCOLORKEYHW,"CreateSurface returned: %x\n",rc); - if(FAILED(rc)) - { - skip("Failed to create surface\n"); - return; - } - - /* start with a new set of surfaces to test the color keying parameters to blit */ - memset(&ddsd, 0, sizeof(ddsd)); - ddsd.dwSize = sizeof(ddsd); - ddsd.ddpfPixelFormat.dwSize = sizeof(ddsd.ddpfPixelFormat); - ddsd.dwFlags = DDSD_CAPS | DDSD_WIDTH | DDSD_HEIGHT | DDSD_PIXELFORMAT | DDSD_CKSRCBLT | DDSD_CKDESTBLT; - ddsd.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN; - ddsd.dwWidth = 800; - ddsd.dwHeight = 600; - ddsd.ddpfPixelFormat.dwFlags = DDPF_RGB; - U1(ddsd.ddpfPixelFormat).dwRGBBitCount = 32; - U2(ddsd.ddpfPixelFormat).dwRBitMask = 0xFF0000; - U3(ddsd.ddpfPixelFormat).dwGBitMask = 0x00FF00; - U4(ddsd.ddpfPixelFormat).dwBBitMask = 0x0000FF; - ddsd.ddckCKSrcBlt.dwColorSpaceLowValue = 0x0000FF; - ddsd.ddckCKSrcBlt.dwColorSpaceHighValue = 0x0000FF; - ddsd.ddckCKDestBlt.dwColorSpaceLowValue = 0x000000; - ddsd.ddckCKDestBlt.dwColorSpaceHighValue = 0x000000; - rc = IDirectDraw_CreateSurface(lpDD, &ddsd, &lpSrc, NULL); - ok(rc==DD_OK || rc == DDERR_NOCOLORKEYHW,"CreateSurface returned: %x\n",rc); - if(FAILED(rc)) - { - skip("Failed to create surface\n"); - IDirectDrawSurface_Release(lpDst); - return; - } - - memset(&fx, 0, sizeof(fx)); - fx.dwSize = sizeof(fx); - fx.ddckSrcColorkey.dwColorSpaceHighValue = 0x110000; - fx.ddckSrcColorkey.dwColorSpaceLowValue = 0x110000; - fx.ddckDestColorkey.dwColorSpaceHighValue = 0x001100; - fx.ddckDestColorkey.dwColorSpaceLowValue = 0x001100; - - rc = IDirectDrawSurface_Lock(lpSrc, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - lpData[0] = 0x000000FF; /* Applies to src blt key in src surface */ - lpData[1] = 0x00000000; /* Applies to dst blt key in src surface */ - lpData[2] = 0x00FF0000; /* Dst color key in dst surface */ - lpData[3] = 0x0000FF00; /* Src color key in dst surface */ - lpData[4] = 0x00001100; /* Src color key in ddbltfx */ - lpData[5] = 0x00110000; /* Dst color key in ddbltfx */ - rc = IDirectDrawSurface_Unlock(lpSrc, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - lpData[0] = 0x55555555; - lpData[1] = 0x55555555; - lpData[2] = 0x55555555; - lpData[3] = 0x55555555; - lpData[4] = 0x55555555; - lpData[5] = 0x55555555; - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Test a blit without keying */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, 0, &fx); - ok(rc == DD_OK, "IDirectDrawSurface_Blt returned %08x\n", rc); - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - /* Should have copied src data unmodified to dst */ - ok(lpData[0] == 0x000000FF && - lpData[1] == 0x00000000 && - lpData[2] == 0x00FF0000 && - lpData[3] == 0x0000FF00 && - lpData[4] == 0x00001100 && - lpData[5] == 0x00110000, "Surface data after unkeyed blit does not match\n"); - - lpData[0] = 0x55555555; - lpData[1] = 0x55555555; - lpData[2] = 0x55555555; - lpData[3] = 0x55555555; - lpData[4] = 0x55555555; - lpData[5] = 0x55555555; - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Src key */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYSRC, &fx); - ok(rc == DD_OK, "IDirectDrawSurface_Blt returned %08x\n", rc); - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - - ok(lpData[0] == 0x55555555 && /* Here the src key applied */ - lpData[1] == 0x00000000 && - lpData[2] == 0x00FF0000 && - lpData[3] == 0x0000FF00 && - lpData[4] == 0x00001100 && - lpData[5] == 0x00110000, "Surface data after srckey blit does not match\n"); - - lpData[0] = 0x55555555; - lpData[1] = 0x55555555; - lpData[2] = 0x55555555; - lpData[3] = 0x55555555; - lpData[4] = 0x55555555; - lpData[5] = 0x55555555; - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Src override */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYSRCOVERRIDE, &fx); - ok(rc == DD_OK, "IDirectDrawSurface_Blt returned %08x\n", rc); - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - - ok(lpData[0] == 0x000000FF && - lpData[1] == 0x00000000 && - lpData[2] == 0x00FF0000 && - lpData[3] == 0x0000FF00 && - lpData[4] == 0x00001100 && - lpData[5] == 0x55555555, /* Override key applies here */ - "Surface data after src override key blit does not match\n"); - - lpData[0] = 0x55555555; - lpData[1] = 0x55555555; - lpData[2] = 0x55555555; - lpData[3] = 0x55555555; - lpData[4] = 0x55555555; - lpData[5] = 0x55555555; - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Src override AND src key. That is not supposed to work */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYSRC | DDBLT_KEYSRCOVERRIDE, &fx); - ok(rc == DDERR_INVALIDPARAMS, "IDirectDrawSurface_Blt returned %08x\n", rc); - - /* Verify that the destination is unchanged */ - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - - ok(lpData[0] == 0x55555555 && - lpData[1] == 0x55555555 && - lpData[2] == 0x55555555 && - lpData[3] == 0x55555555 && - lpData[4] == 0x55555555 && - lpData[5] == 0x55555555, /* Override key applies here */ - "Surface data after src key blit with override does not match\n"); - - lpData[0] = 0x00FF0000; /* Dest key in dst surface */ - lpData[1] = 0x00FF0000; /* Dest key in dst surface */ - lpData[2] = 0x00001100; /* Dest key in override */ - lpData[3] = 0x00001100; /* Dest key in override */ - lpData[4] = 0x00000000; /* Dest key in src surface */ - lpData[5] = 0x00000000; /* Dest key in src surface */ - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Dest key blit */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYDEST, &fx); - ok(rc == DD_OK, "IDirectDrawSurface_Blt returned %08x\n", rc); - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - - /* DirectDraw uses the dest blit key from the SOURCE surface ! */ - ok(lpData[0] == 0x00ff0000 && - lpData[1] == 0x00ff0000 && - lpData[2] == 0x00001100 && - lpData[3] == 0x00001100 && - lpData[4] == 0x00001100 && /* Key applies here */ - lpData[5] == 0x00110000, /* Key applies here */ - "Surface data after dest key blit does not match\n"); - - lpData[0] = 0x00FF0000; /* Dest key in dst surface */ - lpData[1] = 0x00FF0000; /* Dest key in dst surface */ - lpData[2] = 0x00001100; /* Dest key in override */ - lpData[3] = 0x00001100; /* Dest key in override */ - lpData[4] = 0x00000000; /* Dest key in src surface */ - lpData[5] = 0x00000000; /* Dest key in src surface */ - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Dest override key blit */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYDESTOVERRIDE, &fx); - ok(rc == DD_OK, "IDirectDrawSurface_Blt returned %08x\n", rc); - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - - ok(lpData[0] == 0x00FF0000 && - lpData[1] == 0x00FF0000 && - lpData[2] == 0x00FF0000 && /* Key applies here */ - lpData[3] == 0x0000FF00 && /* Key applies here */ - lpData[4] == 0x00000000 && - lpData[5] == 0x00000000, - "Surface data after dest key override blit does not match\n"); - - lpData[0] = 0x00FF0000; /* Dest key in dst surface */ - lpData[1] = 0x00FF0000; /* Dest key in dst surface */ - lpData[2] = 0x00001100; /* Dest key in override */ - lpData[3] = 0x00001100; /* Dest key in override */ - lpData[4] = 0x00000000; /* Dest key in src surface */ - lpData[5] = 0x00000000; /* Dest key in src surface */ - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Dest override key blit. Supposed to fail too */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYDEST | DDBLT_KEYDESTOVERRIDE, &fx); - ok(rc == DDERR_INVALIDPARAMS, "IDirectDrawSurface_Blt returned %08x\n", rc); - - /* Check for unchanged data */ - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - - ok(lpData[0] == 0x00FF0000 && - lpData[1] == 0x00FF0000 && - lpData[2] == 0x00001100 && /* Key applies here */ - lpData[3] == 0x00001100 && /* Key applies here */ - lpData[4] == 0x00000000 && - lpData[5] == 0x00000000, - "Surface data with dest key and dest override does not match\n"); - - lpData[0] = 0x00FF0000; /* Dest key in dst surface */ - lpData[1] = 0x00FF0000; /* Dest key in dst surface */ - lpData[2] = 0x00001100; /* Dest key in override */ - lpData[3] = 0x00001100; /* Dest key in override */ - lpData[4] = 0x00000000; /* Dest key in src surface */ - lpData[5] = 0x00000000; /* Dest key in src surface */ - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Modify the source data a bit to give some more conclusive results */ - rc = IDirectDrawSurface_Lock(lpSrc, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - lpData[5] = 0x000000FF; /* Applies to src blt key in src surface */ - rc = IDirectDrawSurface_Unlock(lpSrc, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Source and destination key */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYDEST | DDBLT_KEYSRC, &fx); - ok(rc == DD_OK, "IDirectDrawSurface_Blt returned %08x\n", rc); - - rc = IDirectDrawSurface_Lock(lpDst, NULL, &ddsd2, DDLOCK_WAIT, NULL); - ok(rc==DD_OK,"Lock returned: %x\n",rc); - ok((ddsd2.dwFlags & DDSD_LPSURFACE) == 0, "Surface desc has LPSURFACE Flags set\n"); - lpData = ddsd2.lpSurface; - - ok(lpData[0] == 0x00FF0000 && /* Masked by Destination key */ - lpData[1] == 0x00FF0000 && /* Masked by Destination key */ - lpData[2] == 0x00001100 && /* Masked by Destination key */ - lpData[3] == 0x00001100 && /* Masked by Destination key */ - lpData[4] == 0x00001100 && /* Allowed by destination key, not masked by source key */ - lpData[5] == 0x00000000, /* Allowed by dst key, but masked by source key */ - "Surface data with src key and dest key blit does not match\n"); - - lpData[0] = 0x00FF0000; /* Dest key in dst surface */ - lpData[1] = 0x00FF0000; /* Dest key in dst surface */ - lpData[2] = 0x00001100; /* Dest key in override */ - lpData[3] = 0x00001100; /* Dest key in override */ - lpData[4] = 0x00000000; /* Dest key in src surface */ - lpData[5] = 0x00000000; /* Dest key in src surface */ - rc = IDirectDrawSurface_Unlock(lpDst, NULL); - ok(rc==DD_OK,"Unlock returned: %x\n",rc); - - /* Override keys without ddbltfx parameter fail */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYDESTOVERRIDE, NULL); - ok(rc == DDERR_INVALIDPARAMS, "IDirectDrawSurface_Blt returned %08x\n", rc); - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYSRCOVERRIDE, NULL); - ok(rc == DDERR_INVALIDPARAMS, "IDirectDrawSurface_Blt returned %08x\n", rc); - - /* Try blitting without keys in the source surface*/ - rc = IDirectDrawSurface_SetColorKey(lpSrc, DDCKEY_SRCBLT, NULL); - ok(rc == DD_OK, "SetColorKey returned %x\n", rc); - rc = IDirectDrawSurface_SetColorKey(lpSrc, DDCKEY_DESTBLT, NULL); - ok(rc == DD_OK, "SetColorKey returned %x\n", rc); - - /* That fails now. Do not bother to check that the data is unmodified */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYSRC, &fx); - ok(rc == DDERR_INVALIDPARAMS, "IDirectDrawSurface_Blt returned %08x\n", rc); - - /* Dest key blit still works. Which key is used this time??? */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYDEST, &fx); - ok(rc == DD_OK, "IDirectDrawSurface_Blt returned %08x\n", rc); - - /* With correctly passed override keys no key in the surface is needed. - * Again, the result was checked before, no need to do that again - */ - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYDESTOVERRIDE, &fx); - ok(rc == DD_OK, "IDirectDrawSurface_Blt returned %08x\n", rc); - rc = IDirectDrawSurface_Blt(lpDst, NULL, lpSrc, NULL, DDBLT_KEYSRCOVERRIDE, &fx); - ok(rc == DD_OK, "IDirectDrawSurface_Blt returned %08x\n", rc); - - IDirectDrawSurface_Release(lpSrc); - IDirectDrawSurface_Release(lpDst); -} - static void QueryInterface(void) { IDirectDrawSurface *dsurface; @@ -3141,7 +2632,6 @@ START_TEST(dsurface) return; } - SrcColorKey32BlitTest(); QueryInterface(); GetDDInterface_1(); GetDDInterface_2(); -- 2.10.2